Rewiring - Directional Switch - Part 2
1 | >2< | 3 | 4 | 5 | 6 | 7 | 8 The turn signal was missing left turns at times. Repeated wiggling would make it work, but it isn't super-fabulous. I figured it at least needed to be cleaned and get an application of WD-40 on the contacts. We'll see how that goes. To get at the switch you need to remove the steering wheel. A nine dollar puller worked just fine:
Here is the directional switch:
Check out the bits of broken springs:
The pin in the shifter handle needs to be removed before you can slide out the yoke:
1 | >2< | 3 | 4 | 5 | 6 | 7 | 8
|
