Replacing the Flex Plate - Part 7

Replacing the Flex Plate - Part 7

<< < > >>

1 | 2 | 3 | 4 | 5 | 6 | >7< | 8 | 9

This is the amount that I had to move the tranny back to get the old flex plate out:

The idea that you could remove the flex plate without moving the transmission back really seems far fetched from this picture:

The new flex plate is being bolted on:

When putting in the new u-joint, put a bunch of grease in the cups to make sure that the needle bearings don't fall out.

1 | 2 | 3 | 4 | 5 | 6 | >7< | 8 | 9

This article comes from Fix GMC:
http://www.fixgmc.com/

The URL for this story is:
http://www.fixgmc.com/art72.html

Copyright 2008 FixGMC.com. Read our Terms of Use.