Replacing the Flex Plate - Part 2

Replacing the Flex Plate - Part 2

<< < > >>

1 | >2< | 3 | 4 | 5 | 6 | 7 | 8 | 9

The next step is to remove the u-jount just in back of the transmission. Remove this clip with a pair of needle nose pliers:

The caps slide out the ends when you wiggle the u-joint back and forth:

Don't let the cups fall on the ground. They have needle bearings in them:

Here is the disassembled u-joint. It is time to work some more on loosening the transmission:

1 | >2< | 3 | 4 | 5 | 6 | 7 | 8 | 9

This article comes from Fix GMC:
http://www.fixgmc.com/

The URL for this story is:
http://www.fixgmc.com/art67.html

Copyright 2008 FixGMC.com. Read our Terms of Use.