Building a Camper - The Box - 2
1 | >2< | 3 | 4 | 5 | 6 | 7 | 8 I've added a front cross piece for the cabover bed, and both twelve foot boards are supported and bolted to the cross brace across the front of the bed:
I want to keep the front from bending down first of all, so I need to get some nice plywood on the perpendicular at the back. this is the first piece, a bit under four feet so that some of the wood can be secured at the back:
Here is a key design decision. I'm bolting two 2X4s to the metal rack:
Another shot:
It turns out that this bolt was the only one I had that was long enough:
1 | >2< | 3 | 4 | 5 | 6 | 7 | 8
|
