1 | 2 | 3 | 4 | 5 | 6 | >7< | 8 | 9
This is the amount that I had to move the tranny back to get the old flex plate out:
The idea that you could remove the flex plate without moving the transmission back really seems far fetched from this picture:
The new flex plate is being bolted on:
When putting in the new u-joint, put a bunch of grease in the cups to make sure that the needle bearings don't fall out.
1 | 2 | 3 | 4 | 5 | 6 | >7< | 8 | 9
|
